Vermont Casting 43LDVT - Manual (Page 19)

19
LDVT Series Direct Vent GaS Fireplace
10007852
Vertical Restrictor Plate
36LDVT, 39LDVT, 43LDVT
When installing the 36LDVT, 39LDVT or 43LDVT with a
vertical through-the-roof configuration flue system, the
restrictor plate (#10008048) supplied with the appliance
MUST BE FITTED TO THE APPLIANCE at the instal-
lation.
NOTE: Do not use the restrictor plate supplied with
the vertical termination cap.
1. Remove the rear log support. Save the two (2)
screws.
2. Remove the two (2) nuts and save them.
3. Place the restrictor plate (Fig. 34) and secure it with
the two (2) nuts.
4. Replace the rear log support to the same location
as before and secure it with the screws removed in
Step 1.
������
����������������
����
Rear Log Support
Restrictor Plate
FP1555
Fig. 34 Assembling the restrictor plate.