Removing the main tray assembly – HP C240 User Manual

Page 140

Advertising
background image

122

Changing Your Workstation’s Hardware Configuration

Removing the Main Tray Assembly

Removing the Main Tray Assembly

Perform the following steps to remove the main tray assembly:

1

Power off the system, the monitor, and any peripheral devices. Unplug the system
unit power cord and the power cord of any peripheral devices from ac wall out-
lets. Disconnect the power cord from the system unit.

NOTICE:

There is no need to manually shut down the HP-UX operating system on
your workstation before powering it off. When you turn off the power
switch, your workstation automatically shuts down the operating system
before terminating the power.

2

Disconnect cables from any peripheral devices.

3

Attach a static-grounding wrist strap to bare metal on the back panel of the system
unit.

4

Completely loosen the five thumb screws on the rear of the system unit, as shown
in Figure 38.

Figure 38

Removing Main Tray Assembly

Thumb Screws

Thumb

Screws

Advertising
This manual is related to the following products: