Cortelco 1 4-Line Multi-User - Manual (Page 14)

14
3. To view the date and time, press #, or wait approximately 10 seconds.
4. The display will return to idle after 20 seconds. Pressing any button
other than and will also terminate Caller ID viewing.
Dial a Telephone Number from the Caller ID Database
1.
Locate the number you wish to call (from Viewing Caller ID Database
section).
2. Pick up the handset or press the button to access an outside
line.
3. Press the and then the buttons to dial.
Store the Telephone Number in a Speed Dial Location
There are 24 memory locations (2 groups) to store Speed Dial numbers.
Each memory location can store up to 24 digits, including PAUSE,
FLASH, and TONE.
1.
Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Speed Dial” item.
3. Press the right arrow key to choose this item. You can also press
the speed dial key directly to view the speed dial number.
4. Press the up or down arrow key to confirm your selection and edit
the speed dial number.
NOTE: To access the second group of speed dial locations press SHIFT +
any speed dial key that you desire. The second set of speed dial
numbers are from location 13 to location 24.
Erasing a Caller’s Information from the Caller ID Database
NOTE: Erasing Caller ID information cannot be undone.
1. Locate the number you wish to erase (from Viewing Caller ID
Database section).
2. Press You will be asked to confirm the deletion.
3. Press to confirm deletion.
0 1 : 1 9 7 1 5 5 5 1 2 3 4
<ERASE>: confirm
0 1 : 1 9 7 1 5 5 5 1 2 3 4
OCT 08 14:22
01: Deleted