Cortelco 1 4-Line Multi-User - Manual (Page 25)

25
Press * any time during your call to change to tone dialing mode. The
telephone is returned to pulse mode when you disconnect.
Tone/Pulse Mode
Depending on the phone service available in your area, you may need to
adjust the dialing mode.
NOTE: All 4 lines will be set to the same dialing mode.
Pulse Mode/Tone Mode
1.
Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Tone/Pulse” item.
3. Press the right arrow key to select this item.
4. Press the up or down arrow key to select Tone or Pulse dialing.
5. Press the right arrow key to confirm your selection.
Transfer
You may transfer an outside line to any extension on the system.
1. While on a outside line conversation, press .
2. Dial the extension you wish to transfer to, or press the desired Station
Select button (see Intercom - Predefined Station Select Buttons).
NOTE: If the call is transferred successfully, a single confirmation ring will
be heard. If the transfer is unsuccessful, a double ring will beeard,
and the call will be placed on hold.
Volume
Handset / Headset Volume
While on a conversation using the handset or headset, press the or
buttons to adjust the volume.
Ringer Volume
While your telephone is idle, press the or buttons to
adjust the ringer volume.
Speakerphone Volume
While on a speakerphone conversation, press the or
buttons to adjust the speakerphone volume.