Tips and hints, Cleaning and care – Cuisinart CLEANWATER WCH-950C User Manual

Page 5

Advertising
background image



3. To allow internal hot and cold water tanks to

fill, place glass under spigot and press and

hold both Cold and Hot buttons until water

flows steadily (about 1 minute).

NOTE: Until

air is fully displaced by water, water flow will

be a little erratic.

4. Close the lid.
5. Plug the unit into an electrical outlet. Press

the On/Off power switch on the control

panel to turn on. The blue light around the

power switch indicates the unit is on and

the cold and hot features are activated.

6. Dispense 16 ounces (475 ml) of room

temperature water to remove any unfiltered

water.

7. After about 15 minutes the red hot water

indicator will light up. After approximately 1

hour the blue cold water indicator will light

up signaling the water has chilled. Your

Cuisinart

Countertop Filtration

System is now ready for use.

NOTE: On subsequent fill-ups, unit may take

up to 30 minutes to chill and 10 minutes to

heat.
Using the Filter Timer

It is important to change your water filter

regularly to enjoy the full benefits of good

tasting filtered water. The filter timer

automatically reminds you when your water

filter needs to be changed. It has

a life of 3 to 4 months, or 80 gallons (302 L).
Once the filter is in place and unit is

assembled, start the filter timer as follows:
1. On the cover, there is a filter timer that lets

you know when to replace the filter.

2. Tear off the slip that insulates the battery.

Peel off “Filtering” sticker from filter timer

screen.

3. Press and hold the Start button until the

word “Filtering” is displayed (approximately

3 seconds).

4. In 12 weeks, the word "REPLACE"

will appear. We recommend replacing the

filter with a new Cuisinart

®

Water Filter

within the following 2 weeks, depending on

usage.

NOTE: Only the Cuisinart

Replacement Filter (see next page) can be

used with this unit.

5. Once you replace the filter, reset the timer

by pressing the Start button.

NOTE: If you

do not replace the filter and press and hold

Start button for 3 seconds, the timer will

automatically shut off for power save and no

display will be shown. You can press and

hold Start button for 3 seconds anytime to

reset the timer if needed. If you press Start

button for more than 5 seconds the timer

will automatically shut off for power save.

TIPS AND HINTS

• Drinking 4 to 8 glasses of water each day is

healthy! Your countertop chiller makes it

easy.

• Regular use of clean, filtered water in your

automatic coffeemaker means less frequent

decalcification treatments.

• Use filtered water in your iron to reduce

mineral build-up.

• Treat your pets to clean, filtered water.
• Clean, filtered water makes tea and instant

soup or coffee taste better.

CLEANING AND CARE

CAUTION: To prevent personal injury

or electric shock, always unplug your

Cuisinart

®

Countertop Filtration

System from outlet before cleaning. Do not

immerse base in water or other liquid.
1. Turn the unit off and unplug it from outlet.
2. Remove the filter and place it in a bowl.
3. Lift upper water tank and let it drain into

lower tank, and set it aside. Then lift lower

tank off base and empty. Careful, a full tank

can be very heavy!

4. Clean the water tanks and the cover with

warm soapy water.

5. The base is not immersible. Simply wipe it

clean with a damp cloth.

6. Dry thoroughly when clean.

Advertising