Kyocera Hydro LIFE - Manual (Page 27)

Phone Calls 27
Call Waiting
To enable Call waiting:
1. Touch Home > > Dialpad tab to
display the phone dialpad.
2. Touch > Call settings > Additional
settings.
3. Select the Call waiting check box.
To respond to an incoming call while you
are on a call:
► On the Incoming call screen, tap
.
To switch back to the first caller:
► Tap Switch calls.
To create a conference call between your
existing call:
► Tap Merge calls.
Conference Calling
1. On the Phone screen, enter a number
and touch .
2. Once you have established the
connection, touch Add call, and dial the
second number. (This puts the first
caller on hold and dials the second
number.)
3. When you are connected to the second
party, touch Merge calls.
4. If you want to add another call to the
existing conference, repeat steps 2 and
3.
If one of the people you called hangs up
during your call, you and the remaining
caller stay connected. If you initiated the
call and are the first to hang up, all callers
are disconnected.
► To end the conference call, touch
.
Fixed Dialing Numbers (FDN)
1. Touch Home > .
2. Touch > Call settings > Fixed
Dialing Numbers.
3. Touch Enable FDN, Change PIN2, or
FDN list.
Call Forwarding
To configure the Call forwarding settings:
1. Touch Home > .
2. Touch > Call settings > Call
forwarding.
3. Select Always forward, Forward when
busy, Forward when unanswered, or
Forward when unreachable.
Note: You are charged a higher rate for
calls you have forwarded.
Additional Settings
Caller ID
1. Touch Home > .
2. Touch > Call settings > Additional
settings > Caller ID.
3. Select Network default, Hide number,
or Show number.