Kyocera Hydro LIFE - Manual (Page 48)

48 User Manual
7 Web and Data
Wi-Fi
Turn Wi-Fi On and Connect to a
Wireless Network
1. Touch Home > > Settings >
Wi-Fi.
Shortcut: You can also touch Home
> > Set up Wi-Fi to set up a Wi-
Fi network.
2. Touch the ON/OFF switch to turn Wi-Fi
on.
3. Touch Wi-Fi. The network names and
security settings (open network or
secured with WEP/WPA/WPA2
PSK/802.1x EAP) of detected Wi-Fi
networks are displayed.
4. Touch a Wi-Fi network to connect. If you
selected an open network, you will be
automatically connected to the network.
If you selected a network that is secured
with a password, enter the password
and then touch Connect.
When your phone is connected to a
wireless network, the Wi-Fi icon (
)
appears in the status bar and tells you the
approximate signal strength.
If Network notification in Advanced Wi-Fi
settings is enabled, the open network icon
(
) appears in the status bar whenever
the phone detects an available open
wireless network within range.
Check the Wireless Network
Status
1. Touch Home > > Settings >
Wi-Fi.
2. Touch the wireless network that the
phone is currently connected to. You will
see a message box showing the Wi-Fi
network name, status, speed, signal
strength, and other details.
Note: If you want to remove the
wireless network settings, touch Forget
on this window. You need to enter the
settings again if you want to connect to
this wireless network.
Connect to a Different Wi-Fi
Network
1. Touch Home > > Settings >
Wi-Fi. Detected Wi-Fi networks are
displayed in the Wi-Fi networks section.
 To manually scan for available Wi-Fi
networks touch > Scan.
2. Touch another Wi-Fi network to connect
to it.
Note: If the wireless network you want
to connect to is not in the list of detected
networks, touch
. Enter the wireless
network settings and touch Save.