Kyocera Hydro LIFE - Manual (Page 129)

Tools and Calendar 120
Touch SEARCH FOR DEVICES. Your phone will start to scan for Bluetooth devices 4.
within range.
When you see the name of your headset displayed on the AVAILABLE DEVICES 5.
list, touch the name. Your phone then automatically tries to pair with the headset.
If automatic pairing fails, enter the passcode supplied with your headset. 6.
The pairing and connection status is displayed below the hands-free headset or car kit
name in the Bluetooth devices section. When the Bluetooth headset or car kit is
connected to your phone, the Bluetooth connected icon is displayed in the status bar.
Depending on the type of headset or car kit you have connected, you can then start
using the headset or car kit to listen to music or make and receive phone calls.
Note: Due to different specifications and features of other Bluetooth compatible
devices, display and operations may be different, and functions such as transfer
or exchange may not be possible with all Bluetooth compatible devices.
Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it
automatically by turning on Bluetooth on your phone and then turning on the headset.
However, sometimes you will need to reconnect manually, for example if you have been
using your headset with another Bluetooth device.
Touch Home > > Settings > Bluetooth. 1.
If Bluetooth is not switched on, touch the OFF icon to turn Bluetooth on. 2.
Make sure that the headset is discoverable. 3.
Touch the headset’s name in the PAIRED DEVICES list. 4.
If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car 5.
kit documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in 6.
Disconnect or Unpair from a Bluetooth Device , and then follow the instructions in
Connect a Bluetooth Headset or Car Kit .
Disconnect or Unpair from a Bluetooth Device
Disconnect a Bluetooth Device
Touch Home > > Settings > Bluetooth. 1.
On the PAIRED DEVICES list, touch the device to disconnect. 2.
Touch OK. 3.