Kyocera Hydro LIFE - Manual (Page 87)

Web and Data 78
 WCDMA/GSM (Auto mode): The phone will connect to WCDMA or GSM. The
phone will scan for the appropriate network and will automatically connect to
it when it is available.
 WCDMA only: The phone will connect to WCDMA only.
 GSM only: The phone will connect to GSM only.
Start a Data Connection
Do the following to start your data connection and open the homepage:
► Touch Home > MetroWEB.
– or –
Touch Home > > Chrome.
Note: Internet connections can be made either through the data service or via Wi-Fi
(configured within the Settings > Wi-Fi page).
Note: You can select the Web browser to use when a Web link is touched from within
either an email or text message.
Data Connection Status and Indicators
Your phone displays the current status of your data connection through indicators at the
top of the screen. The following symbols are used:
Icon Description
Your phone is connected to the GPRS (General Packet Radio Service)
network.
Your phone is connected to the 2G network.
Your phone is connected to the 3G network.
Your phone is connected to the 4G network.
When the arrows are animated, your phone is transferring data (for example, when you
are opening a Web page); when the arrows are gray, your phone is connected to the
network but is not currently transferring data (for example, when you are viewing a
Web page that is completely open). In either state, you can receive incoming calls.