K-Edge K13-490 User Manual
Description, Compatibility, Warnings
1
GARMIN® Mount Installation Instructions
(K13-490)
Description:
The K-Edge GARMIN® Mount is designed for installation of a GARMIN EDGE® computer onto a 31.8mm handlebar.
Compatibility:
The K13-490 GARMIN® Mount is compatible with all GARMIN EDGE® computers utilizing the same mounting system.
Warnings:
These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could
also cause personal injury to the rider.
Parts Included:
K13-490
1x K-Edge Handlebar Clamp
1x K-Edge GARMIN® mount arm
2x M4 x 12 mm bolts
1x M4 x 8 mm (Blue Thread Lock applied)
Tools/Items Required:
Metric Allen Set (3 mm for clamp bolt and 2.5 mm for mounting arm)
Torque wrench