K-Edge K13-550-[color] - Manual

1
Gravity Cap GARMIN® Mount Installation Instructions
(K13-550-[color])
Description:
The K-EDGE Gravity Cap GARMIN Mount is designed for installation of a GARMIN Edge® or GARMIN Forerunner® computer onto
a 1-1/8” Steerer Tube in replacement of the original top cap, placing the computer directly over the steerer tube of the fork.
Compatibility:
The K13-550 Gravity Cap GARMIN Mount is compatible with all GARMIN Edge, Touring, Touring Plus, and Forerunner models
Warnings:
We strongly recommend installation of the Gravity Cap Stem Mount by a professional mechanic. These instructions are generalized
to accommodate a wide range of setups for a bike. If your setup does not match what is being described, take extra care in the
process of your setup and contact K-EDGE Technical Support if you have any questions.
Improper installation of any K-EDGE product or use outside of its design intentions could lead not only to damaging the bike and
related components but could also cause personal injury to the rider.
Parts Included:
 K13-550
 1x K13-551 K-EDGE Gravity Cap GARMIN Mount
 1x K13-503 GARMIN insert
 1x M6 x 35 mm SHCS
 2x M3 x 6 mm (Blue Thread Lock pre-applied)
Tools/Items Required:
 Metric Allen Set (5/6 mm for the top cap bolt and 2 mm for the insert bolts)
 Torque wrench
WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!