Kenton MIDI USB HOST - Manual (Page 4)

4
Specification
Power Input:
5V DC (regulated) – use only the supplied adaptor
(never use an unregulated supply as unregulated supplies typically give a
higher output than shown)
Power :
90mA, 2.1mm plug (centre positive) –
510mA available for attached USB device
MIDI ports:
1x IN, 1x OUT – both 5 pin DIN
Weight:
100g (excluding power supply)
Dimensions:
110 x 55 x 32 mm
Power supply:
A 5V power supply appropriate to the destination country is supplied with the
unit.
Leads: No leads are supplied with the unit
Warranty
The MIDI USB Host comes with a 12 month (from purchase date) back to base warranty, (i.e.
customer must arrange and pay for carriage to and from Kenton Electronics Ltd).
Immunity - This unit conforms to relevant immunity standards for environments E1-E5 except
EN61000-4-3 environments E1-E4 only.
WEEE DIRECTIVE
Correct disposal of this product at the end of its working life
(applies to the European Union & other European countries with separate collection systems)
The crossed-out wheelie bin symbol affixed to this product indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the environment
or to human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable re-use of material resources.
Household users should contact either the retailer where they purchased the product, or their local
government office for details of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
www.kenton.co.uk
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
version 1000 e. & o. e.  18th June 2011