Troubleshooting – Kenton LNDR User Manual
Page 3
Advertising
3
Troubleshooting
Check that you are using a properly wired CAT5 cable – see above.
Check that you are using a “straight through” cable, not a “crossover” cable.
Check that the “active” LEDs are lit.
If you encounter problems at very long distances, it could be the result of volt-drop in
the CAT5 cable, in which case substituting the power supply for a 12 or 15 volt unit
type will help. Note that we have tested the LNDR system to over 750 metres using
the supplied PSU without problems.
Advertising