Kenton String Ensemble (after Sept 07) - Manual (Page 3)

ADDITIONAL INFORMATION
1) Receive channel setting will return you directly to playing mode, all other keys will let you stay in SET-UP mode
until you press the ENTER key (Top C).
2) If you want to put the MIDI back to the default settings at any time, switch the synth on whilst holding the red
push button pressed - hold for a couple of seconds then release.
3) During set-up mode, the retrofit will receive on ALL MIDI channels. At all other times the retrofit is in omni-off
mode (receives on specified channel).
4) List of commands recognised - (numbers in hexadecimal)
8nH notes off 9nH notes on & velocity
0CnH Program Change (mk2 only) 0EnH pitch-bend change (down only)
0FEH active sensing
5) The Solina has only a 49 note keyboard. Any notes outside this range will be taken up or down in octave steps in
order to remain playable.