Kenton OB-8 Oberheim - Manual (Page 2)

Function of keys during set-up mode:
C
Receive channel 1 (default) [ Bottom C - MIDI note #36 ]
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8
Ab " " 9
A " " 10
Bb " " 11
B " " 12
C " " 13
Db " " 14
D " " 15
Eb " " 16
E Receive notes OFF
F Transmit channel 1 (default)
Gb " " 2 The transmit channel can be
G " " 3 changed independently of the
Ab " " 4 of the receive channel, and
A " " 5 can be set even during omni
Bb " " 6 on mode.
B " " 7
C " " 8 [ Middle C - MIDI note #60 ]
Db " " 9
D " " 10
Eb " " 11
E " " 12
F " " 13
Gb " " 14
G " " 15
Ab " " 16
A Transmit Key on velocity decrease
Bb " " " " normal (default)
B " " " " increase
C Transmit Key off velocity decrease
Db " " " " normal (default)
D " " " " increase
Eb program change ON (default)
E " " OFF
F local keyboard control ON (default)
Gb “ “ OFF
G not used
Ab not used
A Controller Source Select Pitch-Bend Wheel
Bb Controller Source Select Mod Wheel (cc#1)
B Controller Source Select Aftertouch
C Controller Source Select Velocity
Db Controller Source Select Controller X (assignable – default cc#16)
D Controller Source Select Controller Y (assignable – default cc#17)
Eb Controller Source Select MIDI Volume (cc#7)
E Destination ON Pitch-Bend
F Destination ON Modulation
Gb Destination ON VCF (Filter)
G Destination ON not used
Ab Destination ON VCA (Volume)
A Destination ON not used
Bb Destinations OFF all destinations OFF for the currently selected controller source
B Reset all Sources to their default Destinations (see next page for defaults)
C ENTER key Press & release to store & return to play mode [Top C - MIDI note #96]