Kenton PS3200 - Manual (Page 3)

1) Receive channel and omni-on setting will return you directly to playing mode, all other keys will let you stay in
SET-UP mode until you press the ENTER key (Top C)
2) Control change commands recognised - (numbers in decimal)
123 all notes off
124 omni mode off (always poly)
125 omni mode on (always poly)
94 select transpose mode
126 (mono mode) = all notes off 95 select set-up mode
127 (poly mode) = all notes off
3) Other commands recognised - (numbers in hexadecimal)
8nH notes off 9nH notes on
FEH active sensing
4) Notes recognised (transpose off) are in the range F to E (48 notes) MIDI notes 41 to 88
5) Notes are pins 1 to 48 of the connector -
Pin 55 is +15v pickup from Korg
Pins 57 & 58 are ground connections
MIDI CONTROL OF RED PUSH BUTTON
The red push button can be "pressed" via MIDI as MIDI switch number 95 (5Fh) for regular program mode or 94
(5Eh) for transpose mode. The selection of the push button is enough, it doesn’t matter if it is being turned on or
off.
In hexadecimal BX - 5F - 00 = program mode
In hexadecimal BX - 5E - 00 = transpose mode
Where X is the current MIDI channel.
[N.B. whilst in program/transpose modes the MIDI is in omni on mode]