Kenton PS-3300 - Manual (Page 2)

C Receive channel 1 [ Bottom C ] MIDI note number 36
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8 Selecting a receive channel
Ab " " 9 will automatically put the
A " " 10 MIDI into omni off mode.
Bb " " 11 That is, it will receive on
B " " 12 the selected channel only.
C " " 13
Db " " 14
D " " 15
Eb " " 16
E Omni on mode (default)
F Not used
Gb Not used
G Not used
Ab Not used
A Not used
Bb Not used
B Not used
C Not used [ Middle C ] MIDI note number 60
Db Not used
D Not used
Eb Not used
E Not used
F Not used
Gb Not used
G Not used
Ab Not used
A Not used
Bb Not used
B Not used
C Not used
Db Not used
D Not used
Eb Program change off
E " " ON (default)
F p.bend & mod wheel off
Gb p.bend ON (default)
G mod wheel ON (default)
Ab controller Y - ignored (see page 3 re controller Y)
A " - vcf
Bb " - auxiliiary (default)
B controller X - ignored (see page 3 re controller X)
C " - vcf (default)
Db " - auxilliary
D aftertouch - ignored
Eb " - modulation (default)
E " - p.bend (up only)
F " - vcf
Gb " - auxilliary
G velocity - ignored (default)
Ab " - vcf
A " - vca
Bb MIDI volume - ignored
B " - vca (default)
C ENTER key - Press and release. [ Top C ] MIDI note no. 96