Kenton OB-1 - Manual (Page 2)

C Receive channel 1 [Bottom C on DX-7] MIDI note 36 (24h)
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8 Selecting a receive channel
Ab " " 9 will automatically put the
A " " 10 MIDI into omni off mode.
Bb " " 11 That is, it will receive on
B " " 12 the selected channel only.
C " " 13
Db " " 14
D " " 15
Eb " " 16
E Omni-on mode (default)
F Not used - -
Gb Not used - -
G Not used - -
Ab Not used - -
A Not used - -
Bb Not used - -
B Not used - -
C Not used - - [Middle C] MIDI note 60 (3Ch)
Db Not used - -
D Not used - -
Eb Not used - -
E Not used - -
F Not used - -
Gb Not used - -
G Not used - -
Ab Not used - -
A Not used - -
Bb Notes not retriggered
B Notes are retriggered (default) [also known as multiple trigger]
C Lowest note takes precedence
Db Newest note takes precedence (default)
D Highest note takes precedence
Eb Not used - -
E Not used - -
F p.bend & mod wheel off
Gb p.bend ON (default)
G mod wheel ON (default)
Ab controller Y - ignored (see page 3 re controller Y)
A " - vcf
Bb " - *** (default) (*** not used with this synth)
B controller X - ignored (see page 3 re controller X)
C " - vcf (default)
Db " - ***
D aftertouch - ignored
Eb " - modulation (default)
E " - p.bend (up only)
F " - vcf
Gb " - ***
G velocity - ignored (default)
Ab " - vcf
A " - ***
Bb MIDI volume - ignored
B " - *** (default)
C ENTER key - Press and release. [ Top C ] MIDI note no. 96