Kenton SDS V User Manual
Page 3
Advertising
MAPPING SOUNDS TO MIDI NOTE NUMBERS
Program SDS5
number slot number
1 1
2 2
3 3
4 4
5 5
6 6
7 7
1) No matter how the sounds are assigned, these program numbers always
belong to the same sound (slot number).
2) Any program number above 7 will terminate Mapping mode and return
you to normal play mode.
3) If you assign more than one sound to the same MIDI note, only the
most recent one will sound - the original sound on that note will then
be "unassigned" until it has been given a new assignment.
4) Assignments are stored in non volatile memory.
Advertising