Settings, Intellishield highway/city modes – Cobra Electronics 15 BAND XRS 9770 User Manual

Page 8

Advertising
background image

Settings

Your Detector

Nothing Comes Close to a Cobra

®

11

Settings

Your Detector

10 English

Settings

IntelliShield Highway/City Modes

Your detector is equipped with

IntelliShield false signal rejection technology which

consists of a Highway mode and three different levels of City modes: City X, City

X Beep Off and City X+K.

City X mode sounds a single beep when the signal is

first detected.

City X Beep Off mode prevents all X band audio alerts until the

signal strength reaches Level 3.

City X+K mode combines the City X mode with

prevention of K band audio alerts until the signal strength reads Level 2. This will

reduce false alerts while you are driving in or near urban areas where there are

many sources for conflicting X or K band signals such as microwave towers and

automatic door openers. The factory setting is Highway. The factory City mode

default setting is City X.

Setting City Default
You can set the default level for City mode (

City X, City X Beep Off and

City X+K) either in Program mode or directly using the Set/City button.

City Mode

N W c

To Change From Highway Mode to City Mode
Press and release

the

Set/City

button.

Tone

Visual Display

Voice

One beep

c appears in

the display

City X or City X Beep Off

or

City X, K

To Change From City Mode Back to Highway Mode
Press and release

the

Set/City

button again.

Tone

Visual Display

Voice

Two beeps

h appears in

the display

Highway

To Set the City Mode Default Directly Using the Set/City Button
Press and hold the

Set/

City button.

Tone or Voice

Visual Display

One beep each time the

display cycles

Cycles – see chart above

Release the

Set/City

button to select the

current display as default.

None

City X Beep Off,

City X+K or City X

To Set the City Mode Default Using Program Mode

(See Page 7 For Instructions on Using Program Mode)

In Program mode,

go to City.

Tone

Visual Display

Voice

One beep

City X Beep Off

City X Beep Off

One beep

City X+K

City X, K

Two beeps

City X

City X

Press and

hold the

Set/City

button

City

X+K

City X

City X

Beep Off

NOTE

When you change to City mode, the unit will enter

whichever city default mode is set at the time.

City X Beep Off

City X

Beep Off

City X+K

City X+K

City X

City X

Highway Mode

N W h

Set/City Button

Press and release

Set/City Button

Press and hold

XRS9770_MANL.indd 10-11

8/30/10 8:39 AM

Advertising