Keri Systems BioPointe - Manual (Page 16)

Biopointe Central User’s Manual
Basic Operation 12
A. Log on as Default User
When you start BioPointe Central, you will be prompted to enter the UserID and Password. As this is the
first time you are using BioPointe Central, the default UserID is “SUPVISOR” and the Password is
“PASSWORD”. The words are in capital letters.
To log on to BioPointe Central:
1. Enter “SUPVSIOR” in the USERID box.
2. Type “PASSWORD” in the PASSWORD box.
NOTE:
The maximum characters allowed for each entry is 8.
Difference between a Supervisor and a User is that Supervisor has the right to add
additional Users or Supervisors. In addition, a Supervisor has the rights to perform all
tasks provided by the application.
A First Time User is advised to change the password after this step.
You can also logon using your fingerprint instead of password; the white box on the right will
display the captured fingerprint image. The fingerprint unit will need to be plugged into the
computer prior to starting BioPointe Central.
n