Keri Systems Doors NetXtreme - Manual (Page 3)

Doors NetXtreme
TM
Software Installation Guide
Page 3 of 4 P/N: 01944-001 Rev. B
4. In the Client ID field, enter an integer to be assigned to the client. It is recommended to start with 1 and continuing on
sequentially with the remaining clients.
5. In the Server Name field, enter the name of the server.
6. Leave the Connection Timeout field at the default of “10” seconds.
7. Type in the new password in the two fields given. The password was given to you during the installation of
DoorsNXT (see Figure 3 on page 1).
8. Click on the button.
NOTE: Repeat steps 1-7 for each Client.
3.0 Log On to DoorsNXT
Click on the Connect and Log On tab.
Figure 6: Log On DoorsNXT
1. Enter the Operator Name as shown on Figure 3 on page 1.
2. Enter the Password as shown on Figure 3 on page 1.
3. Click on the button.
4. If everything has been done correctly, you will receive confirmation that you are logged on to the server.
5. Click on the Close button to close the Log On window.