KERN & SOHN GAB 30K5DNM - Manual (Page 27)

GAB-N-BA-e-1315 27
Settings:
GROSS
ZERO
 Unload scales and set to zero
ZERO
GROSS
HI
 Press
TOL
The left digit will be flashing and icon HI will be displayed
ZERO
GROSS
HI
(Example)
 Enter upper limit by pressing
TOL
and
TARE
.
ZERO
GROSS
LO

(Example)

GROSS
ZERO
 Confirm upper limit by pressing
0
.
The weighing scales will change to the prompt for entering
the lower limit.
 Enter lower limit by pressing
TOL
and
TARE
.
 Confirm lower limit by pressing
0
.
The scales will change to zero display.
 To reset the enter value to zero, press
F
C
.
Weighing with tolerance range
 Tare when using a weighing container
 Put on goods to be weighed, tolerance control is started
 The tolerance control is not active when the weight is under
20d.
 To finish tolerance weighing, set both limit to zero by pressing
F
C
.