KGUARD Security EL1622 - Manual (Page 79)

ENGLISH
Easy Link PRO Series: Operating the DVR
DVR User’s Manual
79
Device: PTZ
NOTE :
• To use the PTZ (Pan-Tilt-Zoom) function, you need to establish a connection from the speed dome camera into
the RS-485 port on the rear of the DVR.
• We recommend to modify the PTZ menu if you are an advanced user.
This menu allows you to configure the DVR to behave as a PTZ controller for a speed dome camera . If your camera
does not support PTZ function, you need to purchase a separate PTZ controller for the camera.
• Channel: Select the channel you want to set the PTZ control.
• Protocol: It is very important to configure this parameter correctly. The task of the protocol is to make the DVR
“understandable” for the PTZ-capable camera.
• Baudrate: The speed of the information sent from the DVR to the PTZ-capable camera. Make sure it matches the
compatiblity level of your PTZ-capable camera.
• DataBit/StopBit: The information between the DVR and PTZ-capable camera is sent in individual packages. The
DataBit indicates the number of bits sent, while the EndBit indicates the end of the package and the beginning
of the next (information) package. The available parameters for DataBit are the following: 8, 7, 6, 5. The available
parameters for the StopBit are 1 or 2.
• Parity: Is necessary for error check. See the documentation of your PTZ-capable camera, to configure this setting.
The available options are the following: None, Odd, Even, Mark, or Space.
• Cruise: Enable to allow to use the Cruise mode. In order to use the Cuirse mode you need to set a number of
preset points. See more in “Pop-Up Menu on Live Viewing Screen” on page 30 . If you disable this option, it
means the PTZ-capable camera can be moved only by manual controls and the Cruise function would not be
available.
• Address: Set the command address of the PTZ system. Please be noted that each PTZ-capable camera needs a
unique address to function properly.