KGUARD Security EL1622 - Manual (Page 85)

ENGLISH
Easy Link PRO Series: Operating the DVR
DVR User’s Manual
85
System: General
• Date/Time: You can set the date and time manually or allow the DVR to update automatically, using the NTP
(Network Time Protocol). If you decide to modify manually then click on the date/time box and via on-screen
keyboard enter the current date and time.
• Date Format: Define the format of the date. For example, if you keep the default MM/DD/YY and today’s date is
November 19th, 2013, the date appears on the footages as 11/19/2013.
• Time Format: Define the format of the time. For example, if you keep the default 24Hour and the current time is
5:29:54 PM, the time appears on the footages as 17:29:54.
• DST: Stands for Daylight Savings Time. Make sure if in your country the DST is observer or not.
Typically the clocks are adjusted forward one hour near the start of spring and are adjusted backward in autumn.
Although NTP (Network Time Protocol) allows you to synchronize the DVR with a remote time server over
Internet, please be noted that some of the NTP servers are not fully compatible with DST. To configure the DST
manually, click Setup and fill in the requested data.
When you have finished with the settings, click Apply.