Kuzma 4POINT 110630 - Manual (Page 7)

Fig.4 Assembling the tube onto the horizontal bearing tower.
Cartridge mounting:
Mount the cartridge with the appropriate set of 2.5 mm screws. When fixing cartridge pins be
sure that you do not damage wires under insulation tubes! If you wish you can fix fingerlift at
the side of the headshell- no key required.( Fig. 7A)
Headshell removal and fixing:
This tonearm has a detachable headshell and fixing and positioning it has no negative effect
on tonearm performance. The whole headshell is fixed with one Allen key 2 mm.
Insert it in the top hole and release screw with Allen key for at least one turn (ACW).
(Fig.5&6)
Disconnect cartridge pins, remove Allen key and pull out the headshell. (Fig.7)
Fix the cartridge and return headshell back in to the tube. If it can not be inserted easily,
rotate the screw a little more in ACW direction. Then fix it back in CW direction with gentle
force, around one turn.
Fig.5 Locked Fig.6 Unlocked
Note: Do not over-tighten the screw which locks the headshell.
7
vertical bearing point
vertical bearing cup