LAARS Mighty Venter MV5 (Sizes 500-1825) - Install and Operating Manual - Manual (Page 5)

Mighty Venter Power Vent Systems
Page 5
Figure 1. Vent hood locations.
Table 3. Vent Pipe Reducer Kit.
3. Vent Pipe Reducers
The applicable Part Numbers for the above are
listed in Table 2.
Carton #1 Carton #2 Carton #3
Boiler Mighty Power Mighty Vent Vent Pipe
Model Venter Kit Vent Venter Hood Reducer Kit
Size Order # Model Part # P/N Part #
500 20069301 MV2 20032600 D2000401 20070901
600 20069302 MV3 20032700 D2000402 20070902
715 20069303 MV3 20032700 D2000402 20070902
850 20069304 MV4 20032800 D2000402 20070903
1010 20069305 MV4 20032800 D2000402 20070904
1200 20069306 MV5 20032900 D2000403 20070905
1430 20069307 MV5 20032900 D2000403 20070906
1670 20069308 MV5 20032900 D2000403 20070907
1825 20069309 MV5 20032900 D2000403 20070906
NOTES:
1. Mighty Venter Kit #20069301 also includes the D2000500
transition ring for connection from Mighty Venter to vent hood.
(see note #7 on Figure 2 for more information).
2. Carton #1 includes Installation Instructions. Carton #2
includes one Installation Manual (specific to the Vent Hood). If
any items are missing from the package, contact Laars. Be
prepared with your purchase order number and the order
number on the shipping documents.
3. The contents of the “vent pipe reducer kit” are shown in Table
3.
Table 2. Part Numbers.
Boiler
Model
Vent Pipe
Reducer Kit
Part No.
Qty of
Reducers
In Box
REDUCERS IN CARTON
#1
Size
Part No.
#2
Size
Part No.
#3
Size
Part No.
#4
Size
Part No.
500 20070901 2 10-8 D2000302 8-6 D2000301
600 20070902 2 12-10 D2000303 10-8 D2000302
715 20070902 2 12-10 D2000303 10-8 D2000302
850 20070903 2 14-10 D2000304 10-8 D2000302
1010 20070904 4 16-14 D2000306 14-12 D2000305 12-10 D2000303 10-8 D20000302
1200 20070905 2 16-14 D2000306 14-10 D2000304
1430 20070906 2 18-14 D2000307 14-10 D2000304
1670 20070907 3 18-14 D2000307 14-12 D2000305 12-10 D2000303
1825 20070906 2 18-14 D2000307 14-10 D2000304
Dimensions shown in feet (m).
Vent Hood
7 (2.1) Minimum
Above Public
Walkway
Vent Hood
Vent Hood
1 (0.3) Above Grade
4 (1.2)
Minimum
Vent Hood Must Be
Mounted 4 (1.2)
Minimum Below Windows
3 (0.9m) Minimum
Vent Hood
4 (1.2)
Minimum
6 (1.8) Above Any
Outside Air Intake
Within 10 (3.0)
Vent
Hood