LAARS NeoTherm NTV (Sizes 150–850 MBTU/h) - Users Manual - Manual (Page 10)

Page 9 NeoTherm Boilers and Water Heaters
Quick Start Menu (found in the Info/Install Screen)
Once the unit has been installed and set up, the Quick Start menu provides a simple way
to change the most common settings used in a typical installation.
Quick Start Menu
.
Example - Changing the CH (Central Heat) Setpoint
Changing the CH Setpoint
• On the Quick Start menu, use the Up- and Down-Arrows to go to the line for CH
Setpoint. Press the large OK button to select the line.
• Use the Up- and Down-Arrow buttons to select the value you want.
• Press the round OK button to enter the new value.