LABEC AA-17S - Manual (Page 10)

Please connect the power cord before you start the operation.
Press the main power switch at right lower corner of the front
panel. The power switch light turns on indicating that electric
power is connected. The screen no display, automatically
examine. 1 s later, enter to ready to work state after automatically
examine. LCD display as fig5-1 shows.
RUNYES
-Created by love
Pls Select a cycle
Press Menu/C key, enter cycle select page layout (Look at fig 5-2).
It has 7 types cycle select, display in three page layouts.
Press STEP key and QUICK key to select the cycle you need.
Press OK key for confirmation, and exit cycle select.
Turn on the power switch, select cycle, press OK key, if the water level is lower than the lowest level,
It will enter to this page layout (Look at fig5-3) with alarming sounds. You should add water now. Open the
tank cover at the top of sterilizer, fill water when you hear alarming sounds, it means water tank full.
Please stop to fill water.
5.2 Fill water
5.1 Select cycle
Keep warming
134-S- 4Min-10Min
S Cycle
5.Operation
Fig5-1
Fig5-2
Fig5-3
Operation manual
SEA Series Steam Sterilizers
6
134-B-4Min-10Min
Notice
Refilling