Lake Lite LL-SDL-UG-X - Manual (Page 3)

Solar Underglow– (3.5”)
MODEL: LL-SDL-UG-X
CAUTION: PLEASE KEEP OUR ENVIORNMENT CLEAN! BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Storage Tips (Harsh Winters)
Extreme winter weather can reduce the life expectancy of your Solar Underglow Batteries
1. Extreme cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh battery.
2. Store your Solar Underglow inside during cold months when your dock is not in use.
3. For Best Results and Long Term Storage Follow These tips:
1. Charge Batteries Fully on a sunny day, and before nightfall fully remove the batteries from the product
2. Important: store batteries in a warm dry location
Installing Batteries & Cover
PO BOX 414
105 W. Simon St.
Laotto, IN 46763 Phone: 260‐918‐2758
Fax: 260‐918‐3540
E‐mail [email protected]
www.lakelite.com
www.solarmarinelites.com
1. Install battery in correct position.
2. Install the silicone seal
3. Install cover with provided screws.
4. Push switch to select brightness setting
NOTE: Screw the cover down to apply pressure on the seal. This will
ensure the battery compartment is fully water proof.
NOTE: Light is activated by darkness. (battery must be charged to light
NOTE: Product uses 2pcs AA size of 1.2v NiMh Batteries. Capacity 1200mA or
higher Recommended
Mounting to Surface
1.
2v
NiMh
1200
m
A
1.
2v
NiMh
1200
m
A
Batteries Silicone Seal Cover
1
2
3