Compaq 1124 - Manual (Page 24)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6 Installing the Repeater
Writer: Chris Seiter Project: Installing the Repeater Comments: 185810-001/707113-001
File Name:10024_3.DOC Last Saved On:3/14/96 11:56 AM
PWR B PWR A
Female Power
Cable Connector
Figure 3-5. Connecting the Power Cable
WARNING: The repeater has no power switch. Connecting the repeater to
the power source via the power cable’s three-pronged plug powers up the
repeater
2. Insert the three-pronged plug on the power cable into a non-switched,
grounded power outlet on a wall, a power strip, or a grounded extension
cord. When you plug the power cable into the power source, the PWR
A LED lights steady green.
NOTE: The power outlet should be near the repeater and easily accessible.