Cybex 350A - Manual (Page 20)

20 350A HOME ARC TRAINER
ASSEMBLY
STEP 5:
Place spacers on the right and left side of the handlebar shaft (321). Line up the Left Handlebar (A02) lower pivot
housing with the shaft on the main frame and the shaft on the Left Handlebar with the Linkage (113), then push both
pivot joints in at the same time. Secure the handlebar with Flat hex head bolt M8x16 (501) and Washer 30x8xT2.0
(510) on the lower pivot joint. Secure the handle bar to the Linkage (113) with the Button head cap screw M6x16
(502), Cap (361) and Washer 16x6xT2 (509). Repeat the same procedure for the right hand side.