Lippert Components Solera® Manual Awning Crank Style User Manual
Page 2
Rev: 07.30.2014
Page 2
Solera Manual Awning - Crank Style
TABLE OF CONTENTS
System
2
Safety Information
2
Operation
3
Extending the Awning
3
Adjusting Pitch
5
Fabric Care
5
Solera Manual Gearbox Awning Assembly Webpage
6
Solera Manual Gearbox Awning Components Webpage
7
Variant Code Information
7
Awning Fabric and Roll Bar Replacement
9
System
Safety Information
The “WARNING” symbol above is a sign that a service or maintenance procedure has a safety risk involved and may
cause death or serious injury if not performed safely and within the parameters set forth in this manual.
Always wear eye protection when performing service or maintenance to the vehicle. Other safety equipment to
consider would be hearing protection, gloves and possibly a full face shield, depending on the nature of the service.
This manual provides general service and maintenance procedures. Many variables can change the circumstances
of the service procedure, i.e., the degree of difficulty involved in the service operation and the ability level of the
individual performing the operation. This manual cannot begin to plot out procedures for every possibility, but
will provide the general instructions for effectively servicing the vehicle. In the event the skill level required is too
advanced or the procedure too difficult, a certified technician should be consulted before performing the necessary
service. Failure to correctly service the vehicle may result in death, serious injury or voiding the warranty.