Conair GS1 User Manual

Important safety instructions, Danger, Warning

Advertising
background image

®

fabric steamer

portable

G

re

at

for Travel

Fo

lding Handle

removes

Wrinkles

from

Garments

and

Drapes

For your safety and continued enjoyment of this product, always read

the instruction booklet carefully before using.

Model GS1

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when

children are present, basic safety precautions should

always be taken, including the following:

READ ALL INSTRUCTIONS

BEFORE OPERATING

APPLIANCE

DANGER –

Any appliance is

electrically live even when the switch is off.

To reduce the risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not place or store appliance where it can fall

or be pulled into a tub or sink.

3. Do not place in, or drop into water

or other liquid.

4. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING –

To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. Close supervision is necessary when this

appliance is used by or near children, or

individuals with certain disabilities. Unsupervised

use could result in fire or personal injury.

3. Use this appliance only for its intended use as

described in this manual. Do not use attachments

not recommended by the manufacturer.

4. Never operate this appliance if it has a damaged

cord or plug, if it is not working properly, or if it

has been dropped or damaged, or dropped into

water. Do not attempt to repair the appliance.

Incorrect reassembly or repair could cause a risk

of fire, electric shock, or injury to persons when

the appliance is used. Return the appliance to an

authorized service center for examination and repair.

5. Keep the cord away from heated surfaces. Do

not allow cord to contact heated surfaces. Do not

pull or twist cord. Let appliance cool completely

before putting away. Loop cord loosely around

appliance when storing.

6. This appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this plug

will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician. Do

not attempt to defeat this safety feature.

7. Never drop or insert any object into any opening.

8. Do not use outdoors or operate where aerosol

(spray) products are being used or where oxygen

is being administered.

9. Do not use an extension cord to operate appliance.

10. Surfaces of this appliance may be hot when in

use. Do not let heated surfaces touch eyes or

bare skin.

11. Do not place the steam nozzle directly on any

surface or on the appliance power cord while it is

hot or plugged in.

12. Unplug this appliance before filling or emptying.

Do not overfill.

13. While emitting steam, this appliance may cause

burns if it is used too close to the skin, scalp or

eyes, or if it is used incorrectly. To reduce the

risk of contact with hot water coming from steam

vents, test appliance before each use by holding

it away from body.

14. Do not operate steamer without properly filling

the water container.

15. Never yank cord to disconnect from outlet;

instead, grasp plug and pull to disconnect.

16. Burns could occur from touching hot parts, hot

water, or steam. Use care when you turn a steam

appliance upside down – there may be hot water

in reservoir.

17. To reduce likelihood of circuit overload, do not

operate another high wattage appliance on the

same circuit.

18. When installing or removing attachment, please

be sure the unit is off and no steam is being

released to avoid contact with hot water.

19. Use caution when installing or removing

attachment as it may contain hot water from

condensation. Ensure the attachment is dry or

cooled off to avoid contact with hot water.

DUAL VOLTAGE

This is a 120/240V dual voltage appliance and may

be used in the United States and abroad without an

electricity converter.

An adapter plug (not included) may be necessary

when using this appliance in some foreign countries.

If so, plug the steamer into correct adapter plug for

your location and plug assembly into electrical outlet.

NOTE:

This unit is thermostatically protected to shut

off when water has boiled away. You should unplug the

unit before this occurs because surfaces continue to

heat, which could be hazardous and may damage unit.

Before using the garment steamer for the first time, it is

recommended to operate the steamer for approximately

5 minutes, unplug the unit and allow it to cool. Empty

container and refill before actually using.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

HOW TO USE

1. Be sure garment steamer is unplugged.
2. Release handle by pushing red button.
3. While holding main body of steamer, twist steamer

head counterclockwise and lift it to remove.

4. Fill reservoir with ordinary tap water to max fill

line.

DO NOT OVERFILL.

5. Replace steamer head on steamer body, twisting

clockwise into locked position.

6. If steam is spitting or dripping, this indicates that

there may be too much water in the unit. For the

best performance, we strongly recommend filling

the reservoir with less water.

7. Attach brush accessory to steamer if desired.

(Please refer to brush attachment section.)

8. Place appliance on a flat surface in an upright

position. Plug into electrical outlet.

9. Within a few minutes, the unit will begin to emit a

continuous flow of steam from the steam vents. The

garment steamer is now ready to use.

10. Hold steamer by its handle when using. Do not

grasp body of unit while steaming garments or while

unit is hot.

11. Direct the flow of steam toward garment to remove

wrinkles. Do not touch fabric with steam head. However,

do not tilt steamer upward as hot water may leak.

DECALCIFICATION

If the appliance begins to produce steam more slowly

than usual, if the steamer stops producing steam

and then starts again, you may need to decalcify

your steamer. Decalcification refers to removing the

calcium deposits which form over time on the metal

parts of the Steamer. For best performance from

Conair Garment Steamer, decalcify the unit from time

to time. The frequency depends upon the hardness of

your tap water and how often you use the Steamer.

Note: To reduce or eliminate the occurrence of

mineral build - up, we recommend the use of

de-mineralized or distilled water in the unit.
To decalcify, use a solution of

1

/

3

white vinegar and

2

/

3

water in the water container. Plug the unit into

electrical outlet. Turn to the ON position and run

until half the amount has steamed. Turn the unit to

the OFF position, unplug from electrical outlet, and

allow to sit for 30 minutes.
Remove excess water from the reservoir by lifting the

unit, inverting and pouring the water over sink, and

allowing water to drain from internal reservoir.

Repeat the above procedure as many times as

necessary until a normal steam rate returns, usually 2-3

times. With each repeated cycle, use a fresh solution of

vinegar and water. Run one cycle of fresh, cold water

through the unit at the completion of decalcification,

before using the unit again to steam garments.

BRUSH ATTACHMENT

Your garment steamer includes a brush attachment

for extra grooming and care of all your clothes.

The brush helps the steam penetrate the fabric by

separating the fibers. You can use the steamer to

effectively remove wrinkles with or without using

the brush attachment. Do not attempt to attach or

remove the brush attachment while unit is steaming

or hot. Wait until unit is completely cool. Place the

brush onto the steamer head by simply pushing the

brush onto the front of the steamer head. The wider

portion of the brush attachment should be toward the

bottom of the unit.

TO STEAM GARMENTS OR DRAPES

1. Hang up garment/drapery.

2. Gently hold fabric taut with one hand and hold

steamer with the other hand. Hold steamer near

the garment/drapery so that steam is directed

toward it.

Use only in vertical position.

3. Slowly run the steam head up and down and side

to side. To remove stubborn wrinkles, move the

garment steamer very slowly.

TO MAKE CREASES OR PLEATS

1. Hang garment.
2. Fold fabric where crease or pleat is desired. Hold fold

in place while applying steam directly to fold.

TO STEAM TIES

1. Hang tie on hanger.

2. Apply steam directly to tie.

TO STEAM SHOULDERS AND SLEEVES

1. Hang garment, preferably on a padded hanger.

2. Fill out shoulders or sleeves with folded towel.

3. Apply steam to garment.

IB-8909A

LIMITED ONE-YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of

charge for 12 months from the date of purchase if the

appliance is defective in workmanship or materials. To

obtain service under this warranty, return the defective

product to the service center listed below, together with

your purchase receipt and $5.00 for postage and handling.

California residents need only provide proof of purchase

and should call 1-800-3-CONAIR for shipping instructions.

In the absence of a purchase receipt, the warranty period

shall be 12 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, SHALL BE

LIMITED IN DURATION TO THE 12-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY. Some states do

not allow limitations on how long an implied warranty lasts,

so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special, incidental,

or consequential damages, so the above limitation may not

apply to you.
This warranty gives you specific legal rights and you may

have other rights which vary from state to state.

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair products call:

1-800-3-CONAIR or visit us on the web at

http://www.conair.com
©2009 Conair Corporation

East Windsor, NJ 08520, Glendale, AZ 85307
Made in China

08PA11275

Folding Handle

Worldwide Dual Voltage

8’ Line Cord

Removable

fabric/lint brush

GETTING TO KNOW

YOUR STEAMER

Advertising