Lippert Components Touch Audio VD300WR - Manual (Page 13)

Rev: 04.10.2014
Page 13
Touch Audio VD300WR Owners Manual
Rating
The rating setting will limit the disks that are playable by the rating set by the user. The rating varies from "Kid Safe"
to "Adult". The default setting is "View All" which nullifies the rating limit.
NOTe: If the password option is locked, you cannot set the ratings limit; the rating limit does not work when
the password option is unlocked.
Default
Choose this option to return all setup options to factory settings.
Language Setup
1. On screen display language setup:
A. Highlight the OSD Language option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the language desired.
C. Press enter on the remote to select the language for the on screen display.
2. Audio language setup:
A. Highlight the Audio Language option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the language desired.
C. Press enter on the remote to select the language for the audio.
3. Subtitle language setup:
A. Highlight the Subtitle Language option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the language desired.
C. Press enter on the remote to select the language for the subtitles.
4. Menu language setup:
A. Highlight the Menu Language option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the language desired.
C. Press enter on the remote to select the language for the menus.
NOTe: If the desired language is not available on a disk, the Touch Audio will display the default language of
Chinese.
Audio Setup
1. Audio output setup:
A. Highlight the Audio Out option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the output mode desired.
C. Press enter on the remote to select the audio output mode designated.
2. Key setup:
A. Highlight the Key option and press enter on the remote.
B. Use the up/down arrows on the remote to designate the key output desired.
C. Press enter on the remote to select the key output designated.