Lippert Components Touch Audio Elite - Manual (Page 10)

Rev: 02.11.2014 Touch Audio Elite Owners Manual
Page 10 of 12
NOTE: If signal is weak in stereo mode, switching to mono may provide better quality.
16. Volume - Press VOL+ button to increase the volume and VOL- to decrease it.
17. Zoom - In DVD/VCD playback mode press the zoom button to zoom into the media. Use the directional
arrows to pan the media once zoomed in. Cycle through pressing the zoom button until its canceled to
return to normal viewing resolution.
18. Slow - Press the slow button to cycle through playing speeds. To return to normal speed either cycle
through the speeds or press the play/pause button.
19. Return to Title - In DVD playback mode press the title button to return to the title menu.
20. Time Display - Press the CLK button to display the time.
Problem Probable Cause Corrective Action
No power Fuse is blown Replace with same value fuse.
Errors in touch screen or no
functions when pressing buttons
Surge or temporarily electronic
disturbance
Press the reset button
Unable to receive radio stations Antenna isn't connected properly Check for damage or connective
issues
Poor radio signal
Antenna isn't proper length Fully extend antenna
Antenna is broken Replace with new antenna
Broadcasting signal is too weak
Change to mono mode or move
closer to signal source
Antenna is poorly grounded Check ground at mounting location
Anti-shaking feature isn't
functioning
The unit is dirty Have certified technician clean unit
The disc cannot be inserted There is a disc already in the unit Remove the disc by pressing eject
The stereo indicator is flashing
Frequency isn't tuned accurately
Use tune dial or seek feature to tune
accurately
Broadcasting signal is too weak
Change to mono mode or move
closer to signal source
Touch screen is not displaying
Video line from main unit to the
TV is not connected properly
Adjust connection
Speckle "white noise" screen is
displaying
Improper video color setting
Set to "PAL" or "NTSC" according
to the connected television
Fuzzy picture is displaying Disc is dirty or damaged Clean or repair disc