Lippert Components Touch Audio Elite - Manual (Page 5)

Rev: 02.11.2014 Touch Audio Elite Owners Manual
Page 5 of 12
Basic Operation
1. Power On/ Off - Press the power button to turn on the unit. Press and hold for 3 seconds to turn off the
unit. While in playback mode, press and release the power button to mute playback.
2. Vol/Bass/Treble/Balance/EQ - Turn VOL dial clockwise to increase volume and counterclockwise to
decrease it.
3. Mode Button - Press the mode button to cycle between Radio, DVD, Bluetooth and Aux modes.
4. Reset Button - When operating the unit for the first time, resetting the unit is recommended. Press the
reset button to set the unit to initial procedure. If the unit malfunctions use the reset button before any
troubleshooting measures are taken.
Radio Operation
During Radio Mode be sure the radio antenna is connected correctly to receive radio signal.
5. Band Selection - In Radio Mode press the band button until you reach the preferred setting.
Manual/Auto Tuning
1. Manual tuning - Press left or right arrow on screen to change the frequency.
2. Auto tuning - Press left or right arrow on screen and hold for 3-5 seconds then release. The radio will
scan up or down respectively until it finds a broadcasting station.
Aps
1. Press Aps button to scan each stored station for 7 seconds then press Aps again to start playing the
station. Press and hold Aps button for more than 3 seconds to start the memory storing function where
the radio automatically selects a station and has it stored.
Station Storage
1. Press and hold any number key to save the current station onto that number preset.
DVD/ VCD/ CD/ MP4 Operation
Inserting a disc (label side upward) will auto play the disc.
1. If the unit is in another mode with a disc already inserted, press and release the mode button to switch
to DVD mode.
2. Eject button - Stop disc then press and release eject button then withdraw disc.
3. Fast Forward/Rewind - Press once for 2x, twice for 4x, three times for 8x, four times for 20x.
4. APS - During DVD/VCD/CD mode, press APS button to change the audio channel between: Left/ Right/
Stereo.
MP3 Playback
1. Track Selection Method 1: After inserting the MP3 the unit will go to the play list. Press and release fast
forward or rewind to change to the next or previous song.
2. Track Selection Method 2: After inserting the MP3 the unit will go to the play list. Use the number pad
on the remote to select a track and then press and release the play button.