Lippert Components Ground Control 2.0 - Manual (Page 3)

Rev: 11.26.2014
Page 3
Ground Control 2.0 Troubleshooting Guide
GROUND CONTROL 2.0
TROUBLESHOOTING GUIDE
Introduction
Ground Control 2.0 is an Automatic Electric Leveling system. The jacks in this system work in pairs.
Components
A
B
C
D
F
G
H
J
I
K
E
Callout Description
A Up Arrow - Scrolls up through the menu on LCD.
B Down Arrow - Scrolls down through the menu on LCD.
C Enter - Activates modes and procedures indicated on LCD.
D Retract - Places leveling system into retract mode.
E LCD Display - Displays procedures and results.
F Auto Level - Places leveling system into auto level mode.
G Front Button - Activates both front jacks.
H Left Button - Activates left jack(s).
I Right Button - Activates right jack(s).
J Rear Button - Activates leveling jacks.
K Power Button - Turns leveling system on and off.
NOTE: Standard Mode - Front can be extended, front and rear can be retracted and
hitch recognition can be operated.
Menu Options include (Only accessible using Up and Down Arrows):
1. Drop Front Jacks - Automatically extends front jacks to the ground
2. Manual Mode - Allows for manual control
3. Auto RET All - Auto retract all jacks
4. Auto RET Rear - Auto retract rear jacks only
5. Tilt Angle - Front to back and side to side (in degrees)
6. Battery Voltage
Fig. 1 - Touch Pad