Lippert Components 3 X 3 Slideout System - Manual (Page 3)

SYSTEM
WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING
MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The Lippert 3 x 3 Slideout System is intended for the sole
purpose of extending and retracting the slideout room. Its
function should not be used for any other purpose or
reason than to actuate the slideout room. To use the
system for any reason other than what it is designed for
may result in damage to the coach and/or cause serious
injury or even death.
Before actuating the system, please keep these things in
mind:
1. 1. 1. 1. 1. Parking locations should be clear of obstructions that
may cause damage when the slideout room is
actuated.
2. 2. 2. 2. 2. Be sure all persons are clear of the coach prior to the
slideout room actuation.
3. 3. 3. 3. 3. Keep hands and other body parts away from slideout
mechanisms during actuation. Severe injury or death
may result.
4. 4. 4. 4. 4. To optimize slideout actuation, park coach on solid and
level ground.
DESCRIPTION
The Lippert 3 x 3 Slideout System is a rack and pinion style slide
system. Utilizing a bidirectional electric motor to actuate the drive shaft,
the slideout room is extended and retracted from the same source. The
actuator has a built-in automatic clutching feature. The Lippert 3 x 3
Slideout System is designed as a negative or positive ground system.
The Lippert 3 x 3 Slideout System is mounted into the frame and allows
the floor of the slideout room, in the fully extended position, to be flush
with the floor of the coach.
There are no serviceable parts within the electric motor. If the motor
fails, it must be replaced.
3