Lippert Components Embedded Rack Slideout System - Manual (Page 8)

Fig. 4
B
C
1. Prior to Manual Operation, be sure to clear any obstruction
from the slideout area that may impede the extension or
retraction of the slideout room, including any transit bars.
2. Locate Slideout Motor under coach.
3. Fit a 9/16” socket and ratchet, 9/16” open end wrench or a
9/16” nut driver and power drill, on the manual drive coupler.
4. By rotating coupler in a clockwise direction, the slideout room
can be retracted. By rotating the coupler in a counter-
clockwise direction, the slideout room can be extended.
Note: Remember to replace transit bars(if equipped) before
moving the coach.
9/16” Manual Override Hex Coupler
Fig. 5
MANUAL OPERATION
8
WARNING!
The gears can be stripped out if the room is manually retracted/extended to it’s
fullest extent and the operator continues to rotate manual override.
Any damage due to misuse of the Manual Override feature will disqualify any and
all claims to the Limited Warranty.