Lippert Components Embedded Rack Slideout System - Manual (Page 9)

PREVENTATIVE MAINTENANCE
The Lippert Embedded Rack Slideout System has been designed to
require very little maintenance. To ensure the long life of your slideout
system, read and follow these few simple procedures.
WARNING!
DO NOT WORK ON YOUR SLIDEOUT SYSTEM UNLESS
THE BATTERY IS DISCONNECTED.
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING MAY
RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
• When the room is out, visually inspect the Inner and Outer Rail
Assemblies. Refer to Fig. 1 for location of inner rail assemblies.
Check for excess build-up of dirt or other foreign material; remove
any debris that may be present.
• If the system squeaks or makes any noises it is permissible to
apply a coat of lightweight oil to the drive shaft and roller areas but
remove any excess oil so dirt and debris do not build-up. DO NOT
use grease.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONSULT YOUR
LOCAL AUTHORIZED DEALER OR CALL LIPPERT AT:
(866) 524-7821.
9