Longshine LCS-6022 - Manual (Page 4)

Jul/05 4 MN0NM9835000
7. Windows 98/95/2000 will automatically restart in order to
update the hardware configuration.
.
8. Once Windows 98/95/2000 has restarted, you can now
connect your external devices to the PCI I/O card. To install
the driver for the external devices, please refer to the
external device user’s manual.
.
Windows NT 4.0
Make sure Windows NT 4.0 is properly installed into your system first.
1. Start Windows NT.
2. Insert Windows NT 4.0 driver diskette (disk 2) into the floppy drive.
3. Select “RUN” option in Windows NT.
4. At the “RUN” option, click on the“Browse” button.
5. At the Browse for Folder window:
Select “Floppy (A)”
Double click on the winnt folder
Select NetMosXXX drivers.exe
Click on the Open button
6. Finally, click the“OK” button
7. Follow the instructions to finish up the driver installation. Your system will automatically restart in order to complete the driver
installation.
Installing DOS Driver
Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”
Update Drivers
Please visit this website: http:/www.netmos.com/for all the latest drivers for your PCI I/O card.