Longshine LCS-8560C1 - Manual (Page 12)

In Identification
I 0 Report product code
RROR”
ntifier string
Report modem data pump model and internal
l
0 Speaker is always off
il CONNECT
nd receiving carrier and turn speaker on during answering.
O1 etrain
support touchtone dialing)
e Profile
1 Restore stored profile 1 after warm reset.
er Detect (CD)Signal
C1 Normal CD operations
Dn
D0 Ignore an on-to-off transition of DTR.
without disconnection.
h profile is loaded.
)
ration
I 2 Report “OK” or “E
I3 Report firmware revision
I4 Report OEM defined ide
I6
code revision
Mn Speaker Contro
M
M1 Speaker ON unt
M2 Speaker is always on.
M3 Speaker off during dialing a
On Return to On-Line Data Mode
O0 Go on-line
Go on-line and r
P Set Pulse Dial
(for phone line that does not
Zn Soft Reset and Restor
Z0 Restore stored profile 0 after warm reset.
Z
&Cn Control Carri
&C0 CD override
&
& DTR Option
&
&D1 Switch to on-line command mode
&D2 Normal DTR operations.
&D3 Modem re-initialized. &Y determines whic
&Fn Load Factory Configuration (Profile
&Wn Store Current Configu