Longshine LCS-8560C1 - Manual (Page 5)

3. Installation
3.1 Hardware Installation
**Do not power on your modem before your finished
the following installation.
1. Plug the male end of the RS-232 cable into the connector marked RS-232
○
3
ble into the serial port on the back of your computer.
e modem.
odem LINE jack
○
2 . Plug the other end into the phone outlet.
E
7. R lights should light up.
on the back of the modem.
2. Plug the other end of this ca
3. Plug the power cable into the AC-IN(or POWER) connector
○
4 on the back of th
4. Plug the power adapter into a wall outlet.
5. Plug one end of the phone cable into the m
6. To use telephone and the modem on the same line, plug one end of the optional phone cable into the PHON
jack
○
1 on the modem; plug the other end into the phone. Lift the telephone handset and listen for a
DIALTONE to check the connection.
Turn your modem on
○
5 . The POWE
8. Turn your computer on.