Longshine LCS-FS6116-C - Manual (Page 5)

Installation
This switch can be placed on your desktop directly, or mounted on
the wall. The installation is a snap. Users can use all the features of
the switch with simply attaching the cables and turning the power
on.
Before installing the switch, we strongly recommend:
1. The switch is placed with appropriate ventilation environment. A
minimum 25 mm space around the unit is recommended.
2. The switch and the relevant components are away from sources
of electrical noise such as radios, transmitters and broadband
amplifiers.
3. The switch is away from environments beyond recommend
moisture.
Desktop Installation
1. Install the switch on a level surface that can support the weight of
the unit and the relevant components, then attach the rubber feet
to the bottom. The rubber feet cushion the switch and helps
protect the case from scratches.
2. Plug the switch to the electrical source with the provided power
cord.
Wall Mount
1.
Screw the two provided screws into the wall 150 mm apart
horizontally. Leave a small gap between the head of the screw
and the wall. The gap should be big enough for the screw heads
to slide into the screw slots and the connection cables to run
down the back of the switch.
2. Align the holes on the back of the switch with the screws on
the wall. Hang the switch on the screws.
5