Longshine LCS-GS8208-A V.1 - Manual (Page 6)

Wiring for 10/100/1000Mbps (Copper)
Following are the summaries of cabling required:
Media Speed Wiring
10Mbps Category 3,4,5 UTP/STP
100Mbps Category 5 UTP/STP 10/100/1000Mbps copper
1000Mbps Category 5,5e UTP/STP
LED Definition
The rich diagnostic LEDs on the front panel can provide the operating status of
individual port and whole system.
Power LED
This indicator lights green when the switch is receiving power; otherwise, it is off.
Port LEDs
Every 100Mbps RJ-45 port on the front panel relevant one LED for indicating the
data transmit & receive status. And two 1000Mbps RJ-45 ports support four
LEDs to indicating the connection speed & data activity status.
Port LED summary table
10/100M
LED Status Statement
10/100M
Steady green
Blinking green Connected as 10/100Mbps
The port is transmitting/receiving data
10/100/1000M
LEDs Status Statement
1000M Steady green Connected as 1000Mbps
100M Steady green Connected as 100Mbps
10M Steady green Connected as 10Mbps
ACT Blinking green The port is transmitting/receiving data
If the port is connected but the Port LED is dark, check the following items:
The switch and the connected device’s power are on or not.
The connecting cable is good and with correct type
4
The cable is firmly seated in its connectors in the switch and in the
associated device