Installing hp web jetadmin, Confirming installation and supply access, Configuring and modifying a device – Longshine LCS-PS112 User Manual
Page 30: Removing hp web jetadmin utility, Configuration from embedded web server, Nstalling, Hp w, Dmin, Emoving, Tility
Installing HP Web JetAdmin
Before installing the HP Web JetAdmin software, you must have domain administrator or root
privileges:
Download the installation files from HP Customer Care Online at
.
Follow the instructions on the screen to install the HP Web JetAdmin software.
Note: Installation instructions are also contained in the
HP Web JetAdmin install file.
Confirming Installation and Supply Access
․
Confirming that the HP Web JetAdmin software is correctly installed by navigating to it with
your browser as shown in the following. For example, http:// server domain port/ where
server domain is the host name of your web server and port is the port number assigned
during installation.
․Supply users access to HP Web JetAdmin software by adding a link to your web server’s
home page that is addressed to HP Web JetAdmin’s URL. For example:
Configuring and Modifying a Device
Using your browser, navigate to HP Web JetAdmin’s URL. For example:
http://server.domain:port/
Follow the instructions on the appropriate home page to configure or modify your printer.
Note: You can also substitute the server domain with TCP/IP address.
Removing HP Web JetAdmin Utility
To remove HP Web JetAdmin software from your web server, use the uninstall program
provided with the software package.
5.
Configuration from Embedded Web Server
30