Longshine LCS-PS112 - Manual (Page 56)

8. In the Printer Ports box, select Close.
9. Click Next.
10. Select the appropriate printer manufacturer and printer type list and click Next.
11. Select Shared. Type in a new Share Name or leave it in default and click Next.
12. A message reading, “After your printer is installed, Windows can print a test page so you
can confirm that the printer is set up properly.”, Select Yes (Recommended) and click
Finish.
13. Done.
Windows 2000/XP/2003 Standard TCP/IP Port Printing Installation
1. C lick Start, point to Settings, and select Printer.
2. Run
Add Printer, Click Next.
3. The Add Printer Wizard screen will appear, Select Local Printer and click Next.
4. From the type of Create a new port box as shown in the following picture, select the
Standard TCP/IP Port, Click Next and Next.
5. The Add Standard TCP/IP Printer Port Wizard box will then appear as shown the picture
as below, and type in the IP address assigned to the print server in the Printer Name
or IP Address box, Click Next.
56