LR Baggs Anthem SL: Installation Manual - Manual (Page 4)

6. BATTERY BAG PLACEMENT
Stick the double-sided adhesive to an easily accessible spot on the back, side or neck block. Insert the battery and battery snap into the bag. The battery can then be
changed by opening the fl ap on the bag and pulling out the battery.
4 8 3 N . F R O N T A G E R O A D • N I P O M O , C A • 9 3 4 4 4 • ( 8 0 5 ) 9 2 9 - 3 5 4 5 • W W W . L R B A G G S . C O M
A. MIC LEVEL CONTROL ( Adjusts the level of the Tru • Mic relative to the
level of the Element)
IMPORTANT: Setting this control correctly is vital to the sound of the Anthem
system.
Play through a P.A. or acoustic amplifi er while you are making adjustments. A
small fl at-head jeweler’s screwdriver will be needed.
B. VOLUME CONTROL
Roll this wheel towards the neck to increase the volume or towards the bridge to
decrease the volume.
Your amplifi ed tone should be well balanced and true to the acoustic sound
and feel of the guitar. If it lacks clarity and top-end, increase the mic’s level by
turning the control clockwise. Back it off slightly If you experience excessive
handling noise and/or brightness.
fi g. 8
7. MOUNTING THE CONTROL
Attach the adhesive pad to the volume control. Remove the protective backing
from the adhesive pad and mount the control in a convenient place on the rim of
the soundhole. Make sure the mounting area is thoroughly cleaned to insure good
adhesion.
8. TESTING & ADJUSTMENTS
Plug into your acoustic amp or PA and confi rm that the EQ controls are at their
default positions.
Secure all wires with the wire clips provided and re-string the guitar.
A
B