Mpg111md instructions #2, Malone – Malone MPG111MD User Manual
Page 3
Installation & Loading Instructions - MPG111MD Stax Pro
MALONE
R
8
9
10
. Apply a T-knob to the bolt and slightly
tighten until the carrier is secure on
the cross bar. Repeat for the second
carrier and rear cross bar. See image 9.
. Insert a mounting bolt into the rear side
hex hole and down through the Jawz
mounting adapter. See image 8.
. Raise the carriers to the up-position and
confirm carriers are in alignment. Firmly
tighten the T-knobs until both carriers are
securely fixed to the cross bars. Place foam
blocks onto the cross bars and next to the
carriers. See image 10.
11
Step 3: Loading a Single Kayak
. Route the free end of a 12’ load strap
through one strap slot in the top of the
carrier. Pull the free end back until
there is an even loop. Repeat for the
second carrier. See image 11.
TM